Plumbing and Drainage

NSW Plumbing Reforms

From 1 January 2013 Fair Trading will become the state's single plumbing and drainage regulator for all on-site plumbing and drainage work.

NSW Fair Trading has delegated inspection and enforcement powers to Dungog council who is responsible for conducting plumbing and drainage inspections.

The 2012 plumbing reforms were part of a state-wide initiative by the NSW Government to provide a more consistent and effective approach to standard setting, on-site regulation and licensing in NSW.

As part of the plumbing regulatory framework, Fair Trading licenses plumbers and drainers under the Home Building Act 1989, and all plumbing and drainage work must be completed by a person who holds a licence, qualified supervisor certificate or tradesperson certificate. In addition, a system of on-site regulation ensures that NSW plumbing and drainage work is monitored, so it complies with technical standards and regulations.

What does this mean for plumbers and drainers in regional NSW?

For plumbers and drainers working in Dungog Council (that is work outside of the areas where Sydney Water and Hunter Water are the water and sewer provider) you continue to contact Dungog council to book inspections, pay inspection fees, submit documentation and for enquires.

Documents and forms

As part of the reforms, plumbers and drainers are required to submit the following documents at certain stages of the work.

  •  Notice of Work is to be issued to the regulator no later than 2 business days before the work concerned is carried out.
  • Certificate of Compliance is to be issued to the regulator and to the person for whom the work was carried out, on completion of the final inspection.
  • Sewer Service Diagram is to be issued to the regulator and the owner of the land or the owners agent.

The above documents are available for downloading belowl.

When must I book an inspection

Inspections are  required when:

  • drainage work is finished and before backfilling or covering the installation (internal & external of the building which may mean two separate inspections).
  • when there is a need for re-inspection or for an inspection of non-compliant work
  • at the completion of all the work, ie. a final inspection.

Codes and Standards

The Plumbing Code of Australia (PCA) is the new technical standard for all plumbing and drainage work in NSW. All plumbing and drainage work in NSW must comply with the PCA.

The new Code replaces the more prescriptive NSW Code of Practice for Plumbing and Drainage and other local requirements. This system means plumbers no longer need to remember a myriad of local variations to plumbing standards. Plumbers will be able to work more easily across different regions, without needing to know local variations.

The PCA sets out performance requirements for the design, construction, installation, replacement, repair, alteration and maintenance of plumbing and drainage installations.

The Code calls up AS/NZS 3500, and it has two provisions that plumbers and drainers can work to and achieve code compliance. One option is for the work to be done under the 'Deemed to Satisfy' provision which means that it has been done in accordance with AS/NZS 3500. The other is the performance based provision where work (usually designed by a hydraulic engineer or consultant) meets or exceeds the requirements of AS/NZS 3500.

Plumbers and drainers can get copies of the PCA from the Australian Building Codes Board.

For More information in relation to performance based provision, plumbers and drainers can download a copy of theGuideline for plumbing and drainage: Installing code compliant work and alternative solutions (PDF size: 204 kb)  from the Fair Trading website.

Downloads:

Sewer Service Diagram Template A4 Landscape (PDF - 48.77KB)

Sewer Service Diagram Template A4 Portrait (PDF - 87.07KB)

Sewer Service Diagram Template A3 Portrait (PDF - 80.43KB)

Sewer Service Diagram Symbols (PDF - 25.9KB)